Capabilities
ECM &
Advanced Hole Drilling
ECM drilling and fast hole EDM for cooling holes in high-performance superalloys.
Technology
ECM drilling
Electrochemical machining (ECM), commonly referred to as stem drilling in this application, produces small-diameter, high-aspect-ratio holes in hard and difficult-to-machine materials. A shaped tubular electrode is progressively fed into the workpiece while electrolyte flows through the machining zone, removing material by electrochemical dissolution rather than cutting, with virtually no cutting forces or thermal effects. Our ECM drilling capability covers hole diameters from approximately 0.6 mm to 3 mm and depths of up to 450 mm. La Rapida is one of the few European manufacturers maintaining this highly specialized capability. In stem drilling, the residual wall thickness of the blade in its most critical sections is one of the key parameters guiding the entire process, and dedicated stem drilling fixtures are designed specifically to protect these thin sections.
Our skills
5-axis fast hole EDM
Fast hole EDM produces complex cooling-hole patterns with diameters from approximately 0.5 mm to 3 mm, using brass tubular electrodes flushed with deionized water and working at multiple angles across complex airfoil surfaces. Our fast hole drilling technology measures the actual airfoil geometry and adapts the drilling pattern to each component, compensating for the permitted variations of precision castings. Breakthrough detection controls the cycle when the electrode reaches the internal cavity, minimizing the risk of insufficient penetration or backwall damage.
Main applications
Cooling hole drilling for turbine blades
Turbine blade hole drilling at La Rapida covers deep cooling and functional holes in rotating and stationary turbine components made from high-performance superalloys, and advanced cooling architectures where multiple holes must connect accurately with internal passages created by ceramic cores during investment casting. These capabilities serve aerospace and industrial gas turbine components requiring advanced cooling performance.
Integrations
Drilling, verification and integration
Hole drilling is combined with die-sinking EDM, 5-axis grinding and multi-axis milling within the same production flow. Drilled geometries are then verified: a dedicated air flow test bench measures the complete cooling configuration against specification, water flow equipment provides visual verification, and ECM-drilled components are routinely submitted for X-ray inspection at an accredited laboratory a few minutes from our facility. For ECM and Fast Hole EDM drilling, metallographic sectioning verifies the resulting metallurgical structure, on groups of similar holes or on each individual feature.
360° process
One partner. The entire process.
EngineeringFeasibility analysis, process development and in-house design of fixtures and tooling, starting from drawings, 3D models or the real part.
MaterialsBar stock, forgings and precision investment castings in nickel- and cobalt-based superalloys, stainless steels and titanium.
MachiningMulti-axis milling, 5- and 3-axis grinding, EDM, wire EDM, Fast Hole EDM, ECM stem drilling and mill-turn machining.
FinishingManual polishing, vibratory finishing, vacuum brazing and thermal processing, with special processes coordinated through qualified partners.
QualityISO 9001 and EN 9100 certified. CMM metrology, FPI, MPI, air flow testing and full traceability from qualification to serial production.
DeliveryCustoms documentation, domestic and international shipping, and our own transport for urgent short- and medium-distance deliveries.
From the drilling strategy to air flow testing and X-ray inspection, every cooled component follows one coordinated route managed by La Rapida.
Other
productions
1
1-step process
Typical components and the manufacturing routes behind them, from single-technology machining to fully integrated production.
2
2-step process
Typical components and the manufacturing routes behind them, from single-technology machining to fully integrated production.
3
3-step process
Typical components and the manufacturing routes behind them, from single-technology machining to fully integrated production.
4
4-step process
Typical components and the manufacturing routes behind them, from single-technology machining to fully integrated production.
5
5-step process
Typical components and the manufacturing routes behind them, from single-technology machining to fully integrated production.
Request a feasibility
assessment
Tell us what you need: our engineers assess feasibility and propose the most suitable manufacturing route. All information is treated confidentially.
Our commitments
What customers can count on, from the first feasibility request to serial production.
Swiss quality
ISO 9001 and EN 9100 certified processes, with complete traceability from incoming material to finished component.
One accountable partner
Engineering, machining, special processes, inspection and delivery coordinated within a single manufacturing flow.
Built for high-mix production
In-house tooling and engineering to manage many part numbers, new qualifications and urgent requirements.
Interpretation
Engineering &
Development
Technical analysis & process development
- Transforming complex requirements into clear production strategies
- Feasibility analysis and problem interpretation
- Definition of machining processes and workflows
Reverse engineering & reconstruction
- Reconstructing components from existing parts or incomplete data
- Measurement, digital modeling and redesign
- Adapting and improving legacy components
Prototyping & validation
- Testing solutions before full-scale production
- 3D simulation and process verification
- Prototype development and optimization
Transformation
Manufacturing &
Technologies
Precision
machining
- Producing high-precision components for critical applications
- Multi-axis milling (3–6 axis)
- Precision grinding and turning
Advanced technologies
- Enabling complex geometries through non-conventional processes
- EDM and wire EDM
- ECM drilling and fast drilling
Processes & treatments
- Refining components to reach final performance requirements
- Heat treatment
- Welding and brazing
- Toolmaking
Resolution
Integration &
Delivery
End-to-end
production
- Managing the entire process as a single system
- Supply chain coordination and integration
- Delivery of fully finished components
Maintenance & refurbishment
- Restoring functionality and extending component life
- Repair of worn or damaged parts
- Reconstruction of obsolete components and adaptation to existing systems
Quality control & validation
- Ensuring accuracy and reliability at every stage
- Dimensional inspection (CMM, laser scan)
- Non-destructive testing
- Material and performance analysis





