Machine Fleet
More than 40 CNC machines for critical turbine components.
One fleet, from airfoil milling to CMM inspection.
La Rapida’s precision manufacturing equipment is organized by process: multi-axis CNC machining, precision grinding, ECM and Fast Hole EDM drilling, die-sinking and wire EDM, and CMM inspection. Each group combines several machines of the same technology, so that components from a few millimetres up to 1,400 mm in length can be produced with consistent precision and repeatability.
CNC & Multi-Axis Machining Equipment
5- and 6-axis airfoil milling
- 11 C.B. Ferrari machining centres
- 5 and 6 simultaneous axes
- Turbine blades and airfoils from a few millimetres up to 1,200 mm in length
- Tolerances typically from ±0.01 to ±0.03 mm
- Steel, titanium and high-temperature superalloys
4- and 5-axis milling
- 4 machining centres: SIGMA (4-axis) and Spinner (5-axis)
- Complex milling, drilling, profiling and critical interfaces
- Components up to 1,400 mm in length
- Tolerances typically from ±0.01 to ±0.03 mm
Precision turning & mill-turn
- Mori Seiki multi-tasking machining centre
- Turning, milling and drilling in a single setup
- Components up to 1,200 mm in length
- Tolerances typically from ±0.005 to ±0.015 mm
Precision Grinding Machines
5-axis precision grinding
- 6 grinding centres: Mägerle, Makino and Blohm
- Creep-feed grinding with continuous dressing
- Complex turbine components and high-temperature superalloys
- Components up to 700 mm in length
- Tolerances typically from ±0.005 to ±0.015 mm
3-axis precision grinding
- 4 grinding machines: Mägerle, Danobat and Blohm
- Surface and profile grinding
- Components up to 800 mm in length
- Tolerances typically from ±0.005 to ±0.010 mm
ECM & Fast Hole EDM Drilling Equipment
ECM stem drilling
- 2 Wimbro ECM drilling machines
- Small-diameter, high-aspect-ratio holes
- Hole diameters from approximately 0.6 to 3 mm, depths up to 450 mm
- Components up to 800 mm in length
5-axis Fast Hole EDM
- 3 CR Technology Fast Hole EDM machines, including 5-axis models
- Complex cooling-hole patterns in blades and vanes
- Hole diameters from approximately 0.5 to 3 mm
- Diameter tolerances typically from ±0.015 to ±0.030 mm
- Components up to 700 mm in length
EDM Equipment
Die-sinking EDM
- 9 die-sinking EDM machines: GF Machining Solutions FORM P 900, AGIE and CR Technology
- In-house electrode manufacturing
- Complex geometries in difficult-to-machine materials
- Components up to 800 mm in length
- Tolerances typically from ±0.005 to ±0.010 mm
Wire EDM
- 3 wire EDM machines: CR Technology and AGIE
- Travelling-wire and continuous/reusable-wire technology
- Intricate profiles in any conductive material
- Components up to 800 mm in length
- Tolerances in the order of ±0.01 mm
- Surface roughness Ra 0.2–0.4 µm
CMM Inspection Equipment
CMM metrology
- 4 Hexagon coordinate measuring machines
- Micrometre-level measurement
- Largest measuring volume 900 × 1,200 × 800 mm (Hexagon GLOBAL Performance)
- Airfoil geometries, tolerances and critical interfaces
- Detailed measurement reporting
3D laser scanning
- Hexagon laser scanning head integrated into the CMM
- High-density surface data for complex geometries
- Comparison with nominal 3D models
- Support for reverse engineering
Request a feasibility
assessment
Tell us what you need: our engineers assess feasibility and propose the most suitable manufacturing route. All information is treated confidentially.
Our commitments
What customers can count on, from the first feasibility request to serial production.
Swiss quality
ISO 9001 and EN 9100 certified processes, with complete traceability from incoming material to finished component.
One accountable partner
Engineering, machining, special processes, inspection and delivery coordinated within a single manufacturing flow.
Built for high-mix production
In-house tooling and engineering to manage many part numbers, new qualifications and urgent requirements.











